Autronica AutroSafe Maritime Gas Detection User Manual

Panel Overview
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 25
6.4 Loop Panels
6.4.1 System Loop Panel BU-110
From the System Loop Panel BU-110 it is possible to mute the panel’s
internal buzzer, silence/resound sounders/bells etc. and reset the
system.
The panel can be configured (by means of the configuration tool) to
show detection zones and point information in an alarm situation, or
detection zones only.
Only points in alarm are shown in the display. Faults and
disablements are indicated by LED indicators. The total number of
detection zones in alarm will always be shown.
By operating the More Events Button, it is possible to scroll through
and view detailed information of the first 64 alarms (or 32 first alarms,
if the panel is configured to show both detection zones and points).
6.4.2 Information Loop Panel BV-110
The Information Loop Panel BV-110 serves as an indication device
only. It provides information related to the defined operation zone(s).
The panel can be configured (by means of the configuration tool) to
show detection zones and point information in an alarm situation, or
detection zones only.
By operating the More Events Button, it is possible to scroll through
and view detailed information of the first 64 alarms (or 32 first alarms,
if the panel is configured to show both detection zones and points).
The panel can store up to 6 faults and 6 disablements. The total
number of faults and disablements in the system will always be
shown, but it is only possible to scroll through and view detalied
information of the first 6 faults and disablements (using the More
Events Button).

Autronica AutroSafe Maritime Gas Detection Specifications

General

Brand	Autronica
Model	AutroSafe Maritime Gas Detection
Category	Security System
Language	English