Autronica AutroSafe Maritime Gas Detection - 14. Service Commands; 14.1 Introduction; 14.2 Service Menu

Service Commands
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 53
14. Service Commands
14.1 Introduction
From the operator panel you can perform service commands. To use
the Service Commands, access level 3 is required.
Access Level
Access Remedy
Description
3
Password restricted.
Accessible by persons trained and authorized to do
reconfiguration of site specific data and maintenance
according to the manufacturer’s published instruction.
4
Mechanical tool.
Accessible by persons doing repair work and changing
firmware.
14.2 Service Menu
The Service Menu includes the following submenus:
NOTE:
The menu is called “Oil and Gas Commands” but these commands
are also intended for maritime Gas systems.
Dual Safety commands do not apply to Maritime Gas.