Autronica AutroSafe Maritime Gas Detection User Manual

Introduction
System Description and Operation, AutroSafe Maritime Gas Detection, 116-P-BS420MG/XGB, Rev. E, 2019-12-10,
Autronica Fire and Security
Page 1
1. Introduction
1.1 About the Handbook
This document provides a description of the AutroSafe Maritime Gas
Detection System.
It provides a total overview of a such system, including:
 a general description of the system architecture
 system units
 requirements
 system functionality
 preinstallation and projecting guidelines
 use of the PowerLoop Calculator Tool
 troubleshooting
1.2 The Reader
This handbook is intended for engineers, projecting consultants, sales
personnel and technical personnel responsible for the projecting,
installation and commissioning of a Martime Gas Detection System.
1.3 Reference Documentation
The table below shows an overview of the standard technical
marketing documentation for AutroSafe. Reference is made
throughout this handbook to topics covered by this documentation (the
name of the handbook and part number are explicitely stated where a
reference is made).
Document Name
Part number
File name
Installation Handbook
116-P-ASAFE-INSTALL/DGB
asafeinstall_dgb
Commissioning Handbook
116-P-ASAFE-COMMISS/EGB
asafecommiss_egb
Wall Chart
116-P-ASAFE-GASWALLCHA/LGB
asafegaswallcha_lgb
Cable Specifications
116-P-ASIFGCABLESPEC/CGB
asafeifgcable_cgb

Autronica AutroSafe Maritime Gas Detection Specifications

General

Brand	Autronica
Model	AutroSafe Maritime Gas Detection
Category	Security System
Language	English