18
--- 3 retpahC Instrument Setup
Location & Setup
When deciding where to locate the QS12, the following items must be taken into consideration:
• Approximately 10 cm (4 in) must be allowed around the cooling system to allo
• Approximately 15 cm (6 in) must be allowed between the wall and the rear panel.
• n the sides of the rear panel must be unobstructed at all times.
•
cket must be accessible at all times.
•
location must be free from draughts, open doors or air conditioning systems.
•
N
ote
peratures resulting in more
favourable working conditions. Locations which have high humidity and / or high ambient temperatures can reduce the
performance of the instrument.
moving during operation.
To Next Page
Loading...