1408/1416 Phone User Guide Page 100
15-601040 Issue 07i (06 November 2015)IP Office 9.0
Comments on this document? infodev@avaya.com
13.6 Changing Your Login Code
You can change your own security PIN (login code). If set, this PIN is used for logging in at other phones, locking your
phone , and accessing system administration features . This is not your voicemail code used for voicemail
access.
1.Press the Features soft key if shown.
· To access the menu during a call, press the right arrow key or press the PHONE key and then press
the Features soft key.
2.Use the up and down arrow keys to scroll the display to the option Phone User.
3.Press the Select soft key or the OK button or the right arrow key.
4.Use the up and down arrow keys to scroll the display to the option Set Password.
5.Press the Select soft key or the OK button or the right arrow key.
6.Enter your current login code if you already have one.
7.Press the Done soft key.
8.Enter your new password.
9.The password changed message will appear for a few moments.
Access Control
Your system administrator can configure whether you can access this menu option. See Menu Access Control .
13.7 Unregistering
This method of logging out will unregister the phone from the telephone system.
· WARNING
· In this state the phone cannot be used to make or answer any calls including emergency calls.
· It is strongly recommended that you do not use this option unless directly advised to do so by your system
administrator. To log out it is recommended that you use the preferred log out method provided.
1.Press the MENU button.
2.Use the up and down arrow keys to locate the option Log Out....
3.Press the Select soft key.
4.Press the Log Out soft key.
5.The phone now displays the menu for unregistered phone log in.
98 164 92
184
98
To Next Page
Loading...
