2420 User Guide
2420 User Guide Page 20
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Viewing the Call Log
1. Press Log. If Log is not shown press to exit the current screen.
• Note: Whilst in the call log you cannot make calls. You can still receive calls and handle
them using the dialpad key functions.
2. Press
and to display different pages of log entries.
• To exit the call log and return to the previous screen press Done.
• To exit the call log and return to the call handling screen press .
• To view the details of a particular log entry, press the or key next to the entry.
Making Calls from the Call Log
1. Press Log. If Log is not shown press to exit the current screen.
2. Press
and to display different pages of log entries.
3. When you locate the entry you want to call, press the
or key next to the entry.
4. Press
Call make the call.
• If the number shown is external but doesn't include the external dialing prefix used by
your telephone system, go off-hook, dial the prefix and then press
Call.
Saving a Call Log Entry to Your Speed Dial List
1. Press Log. If Log is not shown press to exit the current screen.
2. Press
and to display different pages of log entries.
3. When you locate the entry you want to call, press the
or key next to the entry.
4. Press
Save. The speed dial editing screen appears, pre-filled with the details from the call
log entry. See Adding a New Speed Dial.
Deleting a Call Log Entry
1. Press Log. If Log is not shown press to exit the current screen.
2. Press
and to display different pages of log entries.
3. When you locate the entry you want to call, press the
or key next to the entry.
4. Press
Delete. The entry is deleted from the Call Log and the details of the next call are
shown.
5. Press Done to return to the main
• To exit the logged call details and return to the main call log screen press Done.
• To exit the call log and return to the call handling screen press .
To Next Page
Loading...
