2420 User Guide Page 27
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Display Keys
Overview of the Display Keys
The , and keys can be used to access a range of functions. The display adjacent to the key
shows the function name.
Some of these functions are default functions supported by all 2420 phones (eg. SpDial, Log and
Option). Others are functions programmed by the System Administrator for your telephone system.
The main screen has three pages. This means that the eight
and keys on each page can be
used for up to 24 functions. To move between pages use the
and keys.
In the example above:
• The first three keys have been set as call appearance lines. See Call Appearance Keys.
• Keys 5 and 6 have been set to monitor system park slots 1 and 2. The indicates a call is
currently parked in slot 1.
• Key 7 has been set to the SAC (Send All Calls) function.
• Key 8 has been set to VMOn, a function which toggle use of the user's voicemail mailbox on/off.
The
indicates that this function is currently on.
• Pressing either or would display the other two pages of programmed functions set for this
phone.
Programming Your Own Functions:
If the phone has been setup with the Admin function assigned to a display key, you can select and
program your own function choices against other keys. See Display Key Programming.
To Next Page
Loading...
