EasyManua.ls Logo

Avaya 2420 - Conf+ - Conference Add; Cpark - Call Park (!); Cpkup - Call Pickup (!)

Avaya 2420
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2420 User Guide
2420 User Guide Page 36
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Conf+ - Conference Add
Places all calls held by the extension into a conference.
This function does not require any data entered when programmed. This function cannot be
programmed through the phone by the user.
Pressing
Conf+ places the extension and any calls it has put on hold into a conference. This
function will not work if the extension has a current call.
[User | Digital Telephony | Advanced | Call | Conference Add]
CPark - Call Park (!)
Park the current call.
This function can be programmed with or without data. This function can be programmed through the
phone by the user using an
Admin key.
If programmed with data, the number entered is shown next to the
CPark key and is the number
assigned to the parked call.
If programmed without data, the key displays just CPark. Calls parked using this key are is assigned a
number based on the parking extensions number. For example, extension 290's first parked call is
numbered 2900, its next 2901 if 2900 is still parked and so on. If calls are parked using this key, CPark
is shown with a
symbol. Pressing the key again displays the user's parked calls and allow them to be
retrieved.
If not retrieved elsewhere, a parked call will recall to the parking extension after a set time.
[User | Digital Telephony | Emulation | Call Park]
See also:
Park - Park (#).
Park - Call Park to Other Extension (!).
Ride - Ride Call.
CPkUp - Call Pickup (!)
Answer a call ringing elsewhere on the telephone system.
This function does not require any data entered when programmed. This function can be programmed
through the phone by the user using an
Admin key.
The
CPkUp call answers (pickup) any call currently ringing on the telephone system.
Note: We recommend that this function is only used on systems with a small number of users all in one
area. Use of this function on larger system may lead to confusion.
[User | Digital Telephony | Emulation | Call Pickup]
See also:
PickA - Call Pickup Any.
PickG - Call Pickup Group.
PickM - Call Pickup Members.

Table of Contents

Related product manuals