2420 User Guide
2420 User Guide Page 26
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Language
When the 2420 telephone is first installed, it is set to display screen text in English. You can select the
language that you would prefer from the following:
• English, German (Deutsch), French (Français), Spanish (Español), Italian (Italiano), Dutch
(Nederlands) or Portuguese (Português).
• Note: This does not alter your user language setting on the telephone system.
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press
Language. A menu listing the available languages appears, with the current language
underlined.
3. Press the
or key next to the language required. The screen text changes to the language
selected.
4. Do one of the following:
• To save the settings and return to the options menu, press Save. You will hear a
confirmation tone.
• To return to the options menu without saving any changes, press Cancel.
• To return to the call handling screen without saving any changes, press .
Automatic Gain Control (AGC)
Automatic Gain Control (AGC) raises the volume when a caller is speaking quietly and lowers the
volume when the caller is loud. The 2420 supports AGC for both the handset and the headset if
connected.
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press a
or key. A menu listing the current settings for the handset and headset appears.
3. To toggle a particular setting between Yes and No, press the
key next to it.
• Alternatively, press the key next to a call type to underline its current setting and then
press
Yes/No to change the value of the currently underlined setting.
4. Do one of the following:
• To save the settings and return to the options menu, press Save. You will hear a
confirmation tone.
• To return to the options menu without saving any changes, press Cancel.
• To return to the call handling screen without saving any changes, press .
To Next Page
Loading...
