Avaya 2420 - Changing the Ring Pattern; Adjusting the Display Contrast; Call Log Setup; Switch Visual Ring On;Off

2420 User Guide
2420 User Guide Page 24
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Changing the Ring Pattern
The Ring Pattern option allows you to choose a personalized ringing pattern for your telephone. You can
choose from among eight different patterns. This alters the tone and style of ringing used by the phone,
the number of rings will still vary according to the type of call.
• Note: If you receive a call while selecting a ring pattern, you are automatically returned to
the call handling screen.
2. Press
Option. If Option is not shown press to exit the current screen.
3. Press
Ring Pattern. A menu with the current ring pattern appears.
4. To select a ringing pattern use either the
and keys or press a dial pad key between 1 and 8.
You will hear the selected ringing pattern.
5. To hear the ringing pattern again press
Play or repress the dial pad key.
• When you have selected a ringing pattern, press Save. You will hear a confirmation
tone and be returned to the options menu.
• If you want to return to the options menu without changing the ring pattern, press
Cancel.
Adjusting the Display Contrast
You can adjust the contrast level on the telephone display. You can choose from among fifteen levels of
contrast.
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press
Contrast. A menu with the current contrast setting appears.
3. Use the
and keys to adjust the level of contrast.
4. When the contrast is set as required, either:
• Return to the options menu by pressing Done.
• Return to the call handling screen by pressing .
Call Log Setup
Through the Option menu you can specify which types of calls should be included in the 2420's call log.
See Setting Which Calls are Logged.
Switch Visual Ring On/Off
With visual ringing on, the phones lamp flashes when the phone is ringing.
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press
Visual Ring. A menu showing the current setting appears.
3. To change the current setting, either press the
key next to the setting or press Yes/No.
4. Do one of the following:
• To save the setting and return to the options menu, press Save. You will hear a
confirmation tone.
• To return to the options menu without saving any changes, press Cancel.
• To return to the call handling screen without saving any changes, press .