2420 User Guide
2420 User Guide Page 28
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Display Mode
The phone has two display modes. These control the order in which functions are assigned to the
display keys. The modes are:
• Normal Mode:
In this mode the 3 pages of
and keys are ordered sequentially. The keys at the base
of each page provide the SpDial, Log and Option options.
• Call Center Mode:
In this mode some of the
and key functions are repeated against the keys on the first
two screen pages. The
keys for SpDial, Log and Option are only shown on the third screen
page.
To change the Display Mode
:
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press
Display Mode. A menu showing the current setting appears.
3. To change the current setting, either press the
key next to the setting or press Yes/No.
4. Do one of the following:
• To save the settings and return to the options menu, press Save. You will hear a
confirmation tone.
• To return to the options menu without saving any changes, press Cancel.
• To return to the call handling screen without saving any changes, press .
To Next Page
Loading...
