Avaya 2420 - Park - Park (#); Park - Call Park to Other Extension (!); Pcall - Priority Call

Display Keys
2420 User Guide Page 49
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Park - Park (#)
Park and unpark calls to and from a specific park slot.
This function requires entry of a park slot number when programmed. That number and Park then
appears next to the
key. This function can be programmed through the phone by the user using an
Admin 1 key.
The user can use the
key to park calls into that park slot and unpark calls from that slot.
When a call is parked in that park slot (by any user), a
symbol appears next to the key.
• [User | Digital Telephony | Park]
See also:
• CPark - Call Park (!).
• Park - Call Park to Other Extension (!).
• Ride - Ride Call.
Park - Call Park to Other Extension (!)
Allows a call to be parked against another extension. Depending on the other extension's type, its
parked call indication is triggered.
This function can be programmed with or without a target extension number. This function can be
programmed through the phone by the user using an Admin key.
If programmed with a number, the
Park key displays that number. After answering a call, pressing
Park parks the call against that extension.
If programmed without a number, after pressing
Park the target for the parked call must be entered.
The parked call is assigned a number based on the parking extensions number. For example, extension
290's first parked call is numbered 2900, its next 2901 if 2900 is still parked and so on. If not retrieved
elsewhere, a parked call will recall to the parking extension after a set time.
• [User | Digital Telephony | Emulation | Call Park to Other Extension]
See also:
• CPark - Call Park (!).
• Park - Park (#).
• Ride - Ride Call.
PCall - Priority Call
Call a specified target extension even if that extension is set to 'Do not Disturb'.
This function requires the target extension number to be specified when programmed. The target
extension is then shown next to
PCall. This function cannot be programmed through the phone by
the user.
• [User | Digital Telephony | Advanced | Call | Priority Call]