2420 User Guide
2420 User Guide Page 32
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Display Key Functions
Display Key Functions
This section lists the functions that can be programmed against and keys.
The shorthand and longhand names are shown. The shorthand name is the name that is displayed next
to the programmed key, along with any data programmed for the function.
Those functions marked with a (!) can be programmed against a
or key by the 2420 user. This
programming requires the phone to already have one key assigned to the Admin function. See Display
Key Programming.
Those functions marked with a (#) can also be programmed against a
or key by the 2420 user.
This programming requires the phone to already have one key assigned to the Admin 1 function.
These functions can all be programmed by the System Administrator through the telephone system. The
command path is shown, for example:
• [User | Digital Telephony | Emulation | Directory].
<Number> - Dial (#)
Dial the displayed number.
This function requires entry of the number to dial when programmed. The number is then displayed next
to the
key. This function can be programmed through the phone by the user using an Admin 1
key.
Pressing the
keys dials the associated number. Pressing the key again ends the call.
• [User | Digital Telephony | Dial]
See also:
• AD - Abbreviated Dial (!).
• Prog - Abbreviated Dial Program (!).
<Group Name> - Group (#)
Answer or clear calls ringing a specific group.
This function requires entry of the group name in quotation marks when programmed. The name is then
displayed next to the
key. This function can be programmed through the phone by the user using an
Admin 1 key and the group number.
A
symbol appears next to the name and key when calls to that group are ringing. Press the
display details of one of those calls and options to drop (Drop
) the call, answer the call (Answr )
or exit the group monitor (
EXIT).
• [User | Digital Telephony | Group]
To Next Page
Loading...
