Avaya 2420 - Resum - Resume Call; Rtriv - Retrieve Call; Ride - Ride Call

2420 User Guide
2420 User Guide Page 54
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Resum - Resume Call
Resume a call previously suspended into a specified ISDN exchange slot.
This function requires the exchange slot number to be specified when programmed. The slot number is
then shown next to
Resum. This function cannot be programmed through the phone by the user.
Pressing
Resum resumes any call previous suspended into the specified exchange slot. Suspended
calls can be resumed by any extension.
• [User | Digital Telephony | Advanced | Call | Resume Call]
See also:
• Suspe - Suspend Call.
• SusCW - Suspend CW.
Rtriv - Retrieve Call
Retrieve a call previously held into a specified ISDN exchange slot.
This function requires the exchange slot number to be specified when programmed. The slot number is
then shown next to
Rtriv. This function cannot be programmed through the phone by the user.
Pressing
Rtriv retrieves any call previous held into the specified exchange slot. Held calls can only
be retrieved by the extension that put the call on exchange hold.
• [User | Digital Telephony | Advanced | Call | Retrieve Call]
See also:
• Hold - Hold Call.
Ride - Ride Call
Unpark a parked call from a specified system park slot.
This function requires the park slot number to be specified when programmed. The slot number is then
shown next to
Ride. This function cannot be programmed through the phone by the user.
Pressing
Ride unparks any call previously parked into the specified system park slot by the same or
another extension.
• [User | Digital Telephony | Advanced | Call | Ride Call]
See also:
• Park - Park (#).
• CPark - Call Park (!).
• Park - Call Park to Other Extension (!).