Avaya 2420 - Erasing All Logged Calls; Setting Which Calls Are Logged

Using the Call Log
2420 User Guide Page 21
IP Office 3.0(DT) 40DHB0002USEG Issue 3d (16th March 2005)
Erasing All Logged Calls
Loss of power to the 2420 phone will cause all call log entries to be deleted.
The Erase All option also deletes all logged calls. Note however that this also deletes all speed dial
entries and phone personalization options. See Default Phone/Erase All Settings.
Setting Which Calls are Logged
Note: If you change these settings, any call details already in the call log that no longer match the
selection are deleted.
1. Press
Option. If Option is not shown press to exit the current screen.
2. Press
Log Setup. A menu showing the different call types and the current log setting for
each appears.
3. To toggle a particular setting between Yes and No, press the
key next to it.
• Alternatively, press the key next to a call type to underline its current setting and then
press
Yes/No to change the value of the currently underlined setting.
4. Do one of the following: Note: If you press the Save softkey after changing the settings, any
existing call log entries that do not match the call types selected are deleted from the call log.
• To save the settings and return to the options menu, press Save. You will hear a
confirmation tone.
• To return to the options menu without saving any changes, press Cancel.
• To return to the call handling screen without saving any changes, press .