8410D User’s Guide
20 of 37
Hold
To put a call on hold
while you answer
another call, make a call,
or perform some other
task
1 Press Hold
• Green light next to the held call flutters
Note: If you put a conference call on hold, the other parties remain
connected.
To answer a new call
while active on another
1
Press Hold
• Green light next to the held call flutters
2 Press the call appearance button of the incoming call
• You are connected to the incoming call
To return to the held call
1 Press the call appearance button of the held call
• You are connected to the held call
Note: If you are active on a call and you press the call appearance
button of the held call, the active call will be dropped.
Intercom (Automatic/Dial)
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, IAuto (for Automatic Intercom feature), or IDial (for the Dial Intercom
feature) appears on the second line of one of the feature option screens.
To make a call to your
predetermined
Automatic
Intercom partner
1 If you are using an 8410 with a display, press Menu and then press
the softkey below IAuto (while off-hook)
If your 8410 does not have a display or if IAuto is not available on
your display, press
IcomAuto xxx (while off-hook) [ringback tone]
• Special intercom ring is sent
Note: If the call is unanswered, press
Go To Cvr while the call is
ringing if you want to redirect it to coverage.
To dial a call to a
member of your Dial
Intercom group
1 If you are using an 8410 with a display, press Menu and then press
the softkey below IDial (while off-hook)
If your 8410 does not have a display or if IDial is not available on your
display, press
IcomDial xxx (while off-hook) [dial tone]
• Green light goes on steadily
2 Dial the group member’s 1- or 2-digit code [ringback tone]
To Next Page
