8410D User’s Guide
18 of 37
Call Forwarding All Calls
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, CFrwd, appears on the second line of one of the feature option screens.
To temporarily redirect
all calls to an extension
or outside number of
your choice
1 If you are using an 8410 with a display, press Menu and then press
the softkey below CFrwd (while on-hook or off-hook)
If your 8410 does not have a display or if CFrwd is not available on
your display, press
Call Fwd (while on-hook or off-hook)
or Dial the Call Forward access code * 2
(while off-hook)
[dial tone]
Note: Some voice terminals have restrictions on where calls can be
forwarded (see your system manager).
3 Hang up
Note: You may hear a ring-ping tone from your voice terminal as each
call is forwarded.
To cancel Call
Forwarding
1
If you are using an 8410 with a display, press Menu and then press
the softkey below CFrwd (while on-hook)
If your 8410 does not have a display or if CFrwd is not available on
your display, press
Call Fwd (while on-hook)
or Dial the Call Forward cancel code * 3 (while off-hook)
[confirmation tone]
• Your calls will now ring at your own voice terminal
Call Pickup
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, CPkUp, appears on the second line of one of the feature option screens.
To answer a call placed
to a member of your
pickup group when your
voice terminal is idle
1 If you are using an 8410 with a display, press Menu and then press
the softkey below CpkUp
If your 8410 does not have a display or if CPkUp is not available on
your display, press
CallPickup
or Dial the Call Pickup access code # 9
• Called voice terminal stops ringing
• You are connected to the ringing call
To Next Page
