8410D User’s Guide
28 of 37
To end a call
1 Press Speaker again to hang up
• Red light next to
Speaker goes off
Note: If the other person on the call hangs up first, the call is
disconnected. If you press Speaker, you will hear dial tone.
Test
To test the lights and the
display on your voice
terminal
1 While on-hook or off-hook, press and hold Test
• Green light next to
Test goes on
Note: If the green light next to
Test flashes rather than goes on steadily,
it means that the voice terminal is not communicating with the
DEFINITY switch. In such a case, see your system manager.
• The lights go on steadily in two groups, and, if your 8410 has a
display, all the display segments fill in
2 To end test, release Test
• Lights return to normal operation, and the green light next to
Test
goes off
Note: If the display or the lights do not respond during the test, notify
your system manager.
Transfer
To send the present call
to another extension
1 Press Transfer [dial tone]
• Present call is put on hold, and the green light next to the held call
flutters
• You are given a new call appearance
2 Dial the number that the call is to be transferred to [ringback tone]
• Remain on the line and announce the call; if there is no answer or the
line is busy, return to the held call by pressing its call appearance
button
3 Press Transfer again
• Call is sent to the dialed number
4 Hang up
To Next Page
