8410D User’s Guide
31 of 37
Time/Date
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature’s abbreviation, TmDay, appears on the second line of one of the feature option screens.
To see date and time
1
Press Menu and then press the softkey below TmDay
or, if TmDay is not available on your display, press
Date/Time
• Display returns to Normal Mode after a few seconds
Timer
You can access this feature with the softkeys only if your voice terminal has a display and if the
feature name, Timer, appears on the second line of one of the feature option screens.
To see elapsed time
(hours, minutes, seconds)
1 Press Menu and then press the softkey below Timer (which exits you
from softkey mode)
or, if Timer is not available on your display, press
Timer
• Elapsed time is shown
2
To stop the timer and clear the display, press Menu and then press the
softkey below Timer again
or, if Timer is not available on your display, press
Timer again
• Elapsed time is displayed on the screen for about three seconds and
then disappears
To Next Page
