Avaya G430 - Branch Gateway Package Contents

v1a v2a
(MP120
Preinstalled)
Comments Recommended CM Version
- Older versions of CM will
work
(CM blocks more than 105
channels)
BGW 6.3 33.13.0 Yes No No BGW support
MP120
AA 6.2 FP2 CM 6.3 — May 2013
(CM supports all 120 channels)
BGW 6.3.1 34.6.0 Yes No No BGW support
MP120
AA6.2 FP3 CM6.3.2 — Oct 2013
(CM supports all 120 channels)
BGW 6.3.5 35.x.y Yes Yes MP120 Support
V150.1 Features
AA 6.2 FP3 CM 6.3.2 +
(CM supports all 120 channels)
BGW 6.3.6
JITC
36.x.y Yes Yes AA 6.2 FP 4 CM 6.3.6
AA 6.2 FP3 CM 6.3.2 +
(CM supports all 120 channels)
Related links
Before you install on page 10
Branch Gateway package contents
The Branch Gateway chassis and accessories are shipped in a box. The package should contain
the following items:
• One Branch Gateway chassis. The required media modules may be installed.
• One accessories box, containing:
- Two 19” mounting brackets
- One cable management assembly
- Two wall mounting brackets
- One Supplementary Ground Conductor
- Nine 4-40 flat head screws
- Four rubber feet
• Auto-run CD
The Avaya Partner Contact Closure adjunct box, if ordered, is packaged separately.
Related links
Before you install on page 10
Before you install
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 18
Comments on this document? infodev@avaya.com