ART generates the RAS IP address and password (CHAP secret key) and generates an
installation script for the product. Keep the RAS IP address and password to configure your
modem later.
17. Click Download Installation Script File to download the installation script to your laptop, or
Email Installation Script File to have the script emailed to you.
A script file is created and downloaded or emailed to you.
Related links
ART for the RAS IP address on page 13
Downloading recent firmware
About this task
Download any recently updated firmware for the Branch Gateway and media modules to your
laptop. Visit the Avaya Support website
www.avaya.com/supportto check the latest firmware image
file versions against the factory installed versions in the hardware you are installing. Download any
firmware image file upgrades you need from the Avaya Support website, and any Communication
Manager service packs that may be required for the upgrade.
Related links
Before going to site on page 10
The EPW
The EPW is an Excel spreadsheet from which Avaya configuration wizards automatically pull data to
configure and install the S8300 Server and the Branch Gateway. The EPW is filled in by the
customer and project manager, and should be completed before installation.
Note:
For information on the EPW and the Avaya Installation Wizard, see the documentation for
Media Gateways release 5.2.
For greatest efficiency, obtain the Electronic Preinstallation Worksheet (EPW) from the Avaya
Support website at http://support.avaya.com/avayaiw.
Related links
Before going to site on page 10
Site requirements
Inspect the site before you begin the installation. Verify that the site requirements have been met for
adequate environmental conditions, power and grounding availability, safety, and security
conditions. If you find discrepancies between the specifications necessary for proper installation of
equipment and the conditions on site, contact your project manager before proceeding with the
installation.
The Branch Gateway may be installed in a 19" rack, mounted on a wall, or placed on a sturdy table.
Installation instructions are provided in
Installing the Branch Gateway on page 21. The ambient
Before you install
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 15
Comments on this document? infodev@avaya.com
To Next Page
