Chapter 1: Before you install
Before you install
Read this chapter carefully before you begin the installation. If you are installing the Branch
Gateway at a customer site, read this chapter before going to the customer site.
Related links
Before going to site on page 10
Site requirements on page 15
Firmware Specifications on page 17
Branch Gateway package contents on page 18
EM200 package contents on page 19
Before going to site
Before going to the site, it is necessary to read the planning documentation and prepare equipment
required for installation.
Related links
Before you install on page 10
Required equipment on page 10
Obtaining the Branch Gateway serial number on page 12
RFA access on page 12
License file with Survivable Remote Server on page 12
Downloading license and authentication files on page 12
ART for the RAS IP address on page 13
Downloading recent firmware on page 15
The EPW on page 15
Required equipment
Make sure you have the necessary equipment to assist you in the installation before you start
working.
Related links
Before going to site on page 10
Equipment required for installation on page 11
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 10
Comments on this document? infodev@avaya.com
To Next Page
