Chapter 4: Connecting and enabling a USB
modem for remote access
Connecting and enabling a USB modem for remote access
About this task
You can connect a USB modem to the Branch Gateway to enable configuration from a remote
location.
If an S8300 is installed in the Branch Gateway, leave a modem connected permanently to enable
reporting of alarms to remote locations.
Related links
Gateways without S8300 modem connections on page 56
Gateways without S8300 modem connections
You can connect a USB modem to the USB port on the Gateway front panel.
Related links
Connecting and enabling a USB modem for remote access on page 56
Branch Gateways with S8300 USB modems
You can connect a USB modem to a USB port on the S8300 front panel. See USB modems
supported by the S8300 on page 130 for a list of the USB modems supported by the S8300.
Related links
Maintenance web pages on page 57
Branch Gateways with S8300 modem connections on page 58
Testing the modem connection (Branch Gateway with S8300) on page 58
Connecting the USB CD-ROM drive on page 59
February 2017 Installation and Upgrades for the Avaya Branch Gateway G430 56
Comments on this document? infodev@avaya.com
To Next Page
Loading...
