Avaya G430 - The Front Panel of the Avaya MM712 Media Module; The Front Panel of the Avaya MM714 Media Module

The front panel of the Avaya MM712 media module
The MM712 DCP media module includes eight DCP telephone ports. The ports support two-wire
DCP telephones.
Figure 35: The MM712 media module front panel
MM712 ports
The MM712’s eight DCP telephone ports are labeled 1 through 8.
MM712 LEDs
Table 16: MM712 LEDs
LED Name Color Indication
ALM Alarm Red The module type is not the type configured in the
MSG for the slot
TST Test Green Either a test is being performed on the module via
the server, or the module is performing a self-test
upon initial insertion
ACT Activity Yellow A device connected to the module is in use. This can
include a telephone that is off the hook.
The front panel of the Avaya MM714 media module
The MM714 analog media module includes four analog telephone ports and four analog trunk
ports.
Note:
The four analog trunk ports can not be used for analog DID trunks. Instead, the four analog
line ports must be used.
Figure 36: The MM714 media module front panel
Front panel description
July 2018 Deploying and Upgrading Avaya G430 Branch Gateway 111
Comments on this document? infodev@avaya.com