EasyManua.ls Logo

Avaya G430 - Connecting the Trunk

Avaya G430
144 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Trunk ordering
Make sure that the telephone service provider installs the trunk near the physical location of
the Branch Gateway and verifies that the trunk is working properly before you contact the
technician who is performing or supervising the configuration
Note the telephone number of the trunk
Special considerations when ordering an analog trunk
When you order an analog trunk, there are several recommendations depending on your system’s
particular needs:
For optimal functioning of the MM714B Emergency Transfer Relay feature, it is
recommended to use a loop-start trunk
For access to voice mail systems in the United States, it is recommended to use a ground
start trunk to ensure that calls are properly disconnected when the outside caller disconnects.
- Ground start trunks may be provided via the MM711, MM714B or MM714 media modules.
Note:
If you use the MM714B with ground start, you must use a ground start button for ETR.
Request conditioned lines to ensure satisfactory voice quality and trunking interactions
Connecting the trunk
Trunk configurations on Communication Manager
Standalone: Configuration may be performed on site by connecting a laptop computer to the
Services port of the Branch Gateway or S8300, or remotely via a modem connected to the
Branch Gateway, or remotely over the network.
LSP: Configuration is done on the primary Communication Manager server.
Note:
Sync timing configuration for a T1/E1 trunk is done via the CLI.
For information about connecting a laptop to the Services port, see Connecting a computer to the
Services port. For information about preparing a modem, see Chapter 4: Connecting and enabling
a modem for remote access. For information about configuration, see
Branch Gateway
configuration on page 55.
Trunk information recordings for software configuration
When you add a new trunk, note the following information for software configuration:
Slot and port number on the Branch Gateway or EM200 to which the trunk connects
Telephone number of the trunk
Adding media modules and devices
July 2018 Deploying and Upgrading Avaya G430 Branch Gateway 64
Comments on this document? infodev@avaya.com

Table of Contents

Other manuals for Avaya G430

Related product manuals