3. Remove the compact flash memory card.
4. Optionally replace the 512 MB RAM card with the 256 MB RAM card.
5. At the SAT interface of the Communication Manager, enter enable announcement-
board.
6. Make sure there are no more than 256 announcement files in the backup.
If the number of announcement files exceeds 256, manually delete as many as necessary
in the backup directory.
7. Restore the announcements from the USB device to internal flash by entering the CLI
command restore usb usb-devicebackup-name announcements-internal-
flash.
Note:
If you copied the announcement files one by one, you can restore them one by one
using the CLI command copy ftp announcement-file.
8. Screw on the blank plate to cover the compact flash slot.
Upgrading and replacing Field Replaceable Units
July 2018 Deploying and Upgrading Avaya G430 Branch Gateway 78
Comments on this document? infodev@avaya.com
To Next Page
