Avaya G700 - Upgrade an Existing G700 Without an S8300 Using the Upgrade Tool

136 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Checklist 5:
Upgrade an Existing G700 without
an S8300 using the Upgrade Tool
Use Checklist 5 to upgrade a G700 Media Gateway with the following characteristics:
● The G700 does not have an S8300 and is controlled by an external S8300, S8400, S8500,
or S8700-series Media Server.
You will use Chapter 7
with this checklist. For help with connecting to and logging in to the
G700, see About connection methods
on page 63.
Checklist 5: Task List to Upgrade an Existing G700 without an S8300
Major Tasks Subtasks
Before going to the customer
site on page 345
- Get planning forms
- Get the G700 serial number
- Set up TFTP server, if necessary
- Install the Gateway Installation Wizard on laptop
- Download firmware files
On-site preparation for the
upgrade on page 348
- Verify contents of the tftp directory
- Determine which firmware to install
Running the upgrade
on
page 353
Using the Upgrade Tool:
- Install firmware on the P330 Stack Processor
- Install firmware on the G700 media gateway
processor
- Install firmware on the media modules
- Install firmware on other G700s in the stack or
network, if any
-Set Rapid Spanning Tree