Avaya G700 - Administering an IOLAN+ Port; Administering the Gateway

Terminal server installation
Issue 9.1 June 2006 407
Administering the gateway
Note:
Note: If the S8300 Media Server and IOLAN+ are in the same subnet, skip this step.
To administer the gateway for IOLAN+
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press ENTER.
3. Select gateway to access the Gateway menu
4. Fill in the following fields for Entry 1:
● Destination: S8300 Media Server IP address
● Gateway: Gateway address
● Netmask: Subnet mask
Note:
Note: The following steps re-initialize the IOLAN+ so it knows it's connected to the LAN
through your gateway.
5. Select reboot and press ENTER.
6. Press the space bar to restart the IOLAN+.
Administering an IOLAN+ port
Use this procedure when connecting an adjunct or serial COM port on a PC directly (locally) to
the IOLAN+ (see Figure 38: Connecting an adjunct to the IOLAN+
on page 402).
To administer an IOLAN+ port
1. Select Admin mode > Password and press ENTER.
2. Type iolan and press ENTER.
3. Select port and press ENTER.