Avaya G700 - Post-Upgrade Tasks

Post-upgrade tasks
Issue 9.1 June 2006 655
Post-upgrade tasks
Complete the following tasks after you have finished the upgrade:
If using IA770:
1. Restore AUDIX data
on page 656
2. Saving translations
on page 661
3. Installing IA770 service pack (or RFU) files and optional language files, if any
on page 661
Complete the upgrade process (S8300 is the primary controller):
4. To check media modules
on page 663
5. To enable scheduled maintenance
on page 663
6. To busy out trunks
on page 663
7. To check for translation corruption
on page 663
8. To resolve alarms
on page 663
9. To re-enable alarm origination
on page 664
10. To back up the system
on page 664
11. To restart LSPs (if any)
on page 664