On-site preparation for the upgrade
Issue 9.1 June 2006 353
Running the upgrade
Follow these steps:
1. To set up and schedule upgrades, click Schedule Upgrade.
The Schedule Upgrade screen appears. At the bottom of the screen, the system displays all
main servers, LSPs, and gateway targets that are administered.
2. Fill in all appropriate fields for the G700 Media Gateway. Click Help for information about
the fields on the screen.
Note:
Note: The file names must be entered in the correct format. Do not change the names
of the firmware files in the process of loading them onto the TFTP servers. See
Firmware file formats
on page 347.
Use the information from the planning forms or Upgrade Worksheets to complete the
Software/Firmware fields.
To Next Page
Loading...
