Avaya G700 - Before Going to the Customer Site

Upgrading an existing S8300B to R3.1 using the Upgrade Tool
296 Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server
Before going to the customer site
The procedures in this section should be completed before going to the customer site or before
starting a remote installation.
This section covers:
● Planning forms provided by the project manager on page 297
● Getting the serial number of the G700, if necessary on page 297
● Checking the number of allocated ports on page 297
● Checking the versions of the LSPs (if starting from R2.0 only) on page 297
● Checking the FTP server for backing up data on page 298
● Obtaining S8300 software and G700 firmware on page 298
● Obtaining service pack files on page 299
● Obtaining service pack and language files, if using IA770 on page 301
● Completing the RFA process (obtaining license and password file) on page 302