Upgrading the S8300A
Issue 9.1 June 2006 265
Copying files to the S8300
During reformatting of the hard drive, a new directory, /var/home/ftp/pub, was created. For
release 2.0 and later, this pub directory will be used as the /var/home/ftp directory that was used
in previous releases.
You must copy the remaining required files to the pub directory on the S8300 hard drive. This
includes, but is not limited to:
● the post-upgrade software service pack file
● License file
● Avaya authentication file (if needed)
● New firmware files
To copy files to the S8300
1. Log on to Integrated Management and launch the Maintenance Web Interface.
Note:
Note: Since the system is now running a new software release, you must login with the
initial craft ID and password. (You cannot use dadmin at this point.)
2. Under Miscellaneous click Download Files.
The Download Files screen displays.
To Next Page
Loading...
