Avaya G700 - Commands; Keys

Conventions
Issue 9.1 June 2006 29
Commands
● Commands are in constant-width bold type.
Example:
Type change-switch-time-zone and press Enter.
● Command variables are in bold italic type when they are part of what you must type,
and in plain italic type when they are not part of what you must type.
Example:
Type ch ma machine_name, where machine_name is the name of the call delivery
machine.
● Command options are in bold type inside square brackets.
Example:
At the DOS prompt, type copybcf [-F34].
Keys
● The names of keys are in bold sans serif type.
Example:
Use the Down Arrow key to scroll through the fields.
● When you must press and hold a key and then press a second or third key, we separate
the names of the keys are separated with a plus sign (+).
Example:
Press ALT+D.
● When you must press two or more keys in sequence, we separate the names of the keys
are separated with a space.
Example:
Press Escape J.
● When you must press a function key, we provide the function of the key in parentheses
after the name of the key.
Example:
Press F3 (Save).