On-site Preparation for the Upgrade
Issue 9.1 June 2006 685
Backup Now screen (Part Two)
4. Select Network Device and then select FTP for the backup method and fill in the
appropriate fields with information provided by the customer.
5. Click Start Backup to back up the files.
Note:
Note: The backup and restore processes use the ping service to check connectivity to
the backup server. If a backup or restore operation fails, ensure that the ping
service is enabled.
i. On the Maintenance Web Interface, under Security select Firewall.
ii. In the Service column, find ping.
The checkboxes for both Input to Server and Output from Server should be
checked.
6. To check the status of the backup:
a. Under Data Backup/Restore, click Backup History.
To Next Page
Loading...
