Avaya J189 - Sending a multicast page; Pre-configuration of keys; SLA Mon

2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Busy lamp field, and press Select.
6. Scroll to Incoming indication, and press one of the following:
• None: To set the BLF pick up indication to none.
• Audible: To set the BLF pick up indication as an audible ringtone only.
• Visual: To set the BLF pick up indication to visual.
When the monitored phone receives an incoming call, you can view the incoming call
details on a pop-up screen similar to the primary line incoming call. There is no ringtone
on Visual mode.
• Both: To set the BLF pick up indication to both audible and visual.
• Default: To set the BLF pick up indication, selected by your system administrator.
Regardless of the above settings, the monitoring phone’s line key displays the monitored
user’s state icons and LED visual indicators.
7. Press Save.
Customizing Presence parked call indication
About this task
Use this procedure to customize the various indicators when a call is parked at the monitored
user’s extension number.
Note:
This setting applies to all your monitored users.
Procedure
1.
Press
Main menu.
2. Scroll to Settings, and press Select.
3. Scroll to Phone, and press Select.
4. Scroll to Alerting on calls, and press Select.
5. Scroll to Presence, and press Select.
6. Scroll to Parked indication, and select one of the following:
• None: To set the Presence parked call indication to none.
• Audible: To set the Presence parked call indication as an audible ringtone.
Customizing Presence parked call indication
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 107
Comments on this document? infodev@avaya.com