The phone is in the page mode.
4. Do one of the following to select the user or page target group that you want to page:
• Select the required page target group, and press Page.
• Dial the extension number of the user or page target group that you want to page, and
press Page.
• Press Contacts. Select the required user, and press Page.
• Press Recents. Select the required user, and press Page.
The phone pages the parked call details to the selected user or the page target group.
Retrieving a parked call
About this task
If you have parked a call, you can retrieve the parked call before paging it. Other users can
retrieve a parked call after receiving the page.
The phone displays the page details on the Application header, which is the second line from top
of the phone screen.
You cannot use the following features on a paged call:
• Conference
• Hold
• Transfer
• Private Hold
Before you begin
Ensure that you have parked a call using the Dynamic Park and Page feature.
Procedure
Dial the park slot number that is assigned for the parked call. The park slot number is in the page
details.
The call is unparked.
Receiving a page call
About this task
If you are receiving a page, the phone automatically answers the call and displays the page details
on the Application header, which is the second line from top of the phone screen.
You cannot use the following features on a paged call:
• Conference
Dynamic Park and Page
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 91
Comments on this document? infodev@avaya.com
To Next Page
Loading...
