Enabling and disabling BroadWorks Anywhere
Procedure
1.
Press
Main menu.
2.
Scroll to
Features, and press Select.
3. Scroll to BroadWorks Anywhere, and press one of the following:
• Enable: To enable the feature.
The green LED light turns on if one location is configured, else the user is redirected to
the feature configuration to perform one of the following:
- Press Add: To add a location.
- Press Delete: To delete a location.
- Press Edit: To modify a location.
- Press Toggle: To enable or disable a location.
Note:
The BroadWorks Anywhere feature is enabled only if a location is enabled.
• Disable: To disable the feature.
The red LED light turns on, indicating that the feature is available, but inactive.
4. (Optional) To enable or disable BroadWorks Anywhere feature, press the corresponding
line key.
Configuring BroadWorks Anywhere locations
About this task
A location is a phone number that you can use with your primary business number. Use this
procedure to configure locations for the BroadWorks Anywhere feature.
Procedure
1.
Press the
Main menu.
2. Scroll to Settings, and press Select.
3.
Scroll to
Features, and press Select.
4. Scroll to BroadWorks Anywhere.
5. Scroll to Locations, and press Select.
6. Press Add, and configure the following:
• Phone number: The phone number that you want to use for BroadWorks Anywhere.
BroadWorks Anywhere
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 67
Comments on this document? infodev@avaya.com
To Next Page
Loading...
