Avaya J189 - Transferring a call to a monitored phone

BLF call operations
Making a call to a monitored user
Before you begin
Ensure that the status of the monitored user is
idle.
Procedure
Press Call or the corresponding BLF line key.
The phone automatically blocks an available primary line and dials the extension of the monitored
user.
Related links
Busy Lamp Field on page 74
Picking up an incoming call
About this task
Use this procedure to pick up an incoming call for the monitored user.
Before you begin
Ensure that the administrator has activated the direct call pick up operation on your phone.
Procedure
Press Pickup or the corresponding BLF line key.
Note:
If your monitored user holds a local conference call, you can receive multiple incoming calls
for each held participant.
Related links
Busy Lamp Field on page 74
Barging in on an active call
About this task
Use this procedure to barge in on an active call if the monitored user is busy
.
Before you begin
Ensure that the administrator has activated the direct call pick up with barge in operation on your
phone.
Procedure
Press Barge in or the corresponding BLF line key.
Advanced features
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 78
Comments on this document? infodev@avaya.com