Avaya J189 - Pairing a Bluetooth Enabled Headset with Your Phone; Turning Button Clicks on and off

Setting headset mic level
About this task
Use this procedure to adjust the best headset performance.
Before you begin
• Ensure that you are on a call and the caller’s audio level is at 50%.
• Adjust the microphone position as recommended by your headset vendor.
Procedure
1. Press the Main menu.
2. Scroll to Settings and press Select.
3. Scroll to Audio settings and press Select.
4. Scroll to Headset mic level, and press Select.
5. Press one of the following:
• Right arrow key: To increase the gain level.
• Left arrow key: To decrease the gain level.
6. (Optional) To set the default gain level, press Default.
List of headset profiles
Headset Profile Description
Profile 1 L100 Series Headsets
Profile 2 • Plantronics: SupraPlus
®
Wideband HW251N/HW261N (HIS)
• Sennheiser: SH 330/SH 350, CC 510/CC 550 (CAVA-31)
Profile 3 • Plantronics: EncorePro
®
HW291N/HW301N (HIS)
• Sennheiser: Circle
™
SC 230/260 (CAVA-31)
Profile 4 • Jabra: BIZ
™
2400 (GN1216)
• Sennheiser: Century
™
SC 630/660 (CAVA-31)
• VXI: CC Pro
™
4010V DC, CC Pro
™
4021V DC (OmniCord-V)
Profile 5 Jabra: GN2000 (GN1216)
Profile 6 Jabra: PRO
™
9470 (14201-33)
Profile 7 Plantronics:
• CS500
™
Series: CS510, CS520, CS530, CS540 (APV-63)
• Savi
®
700 Series: W710, W720, W730, W740, W745 (APV-63)
Table continues…
Audio
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 145
Comments on this document? infodev@avaya.com