Name Description
Include BroadWorks Anywhere Specifies that all BroadWorks Anywhere locations
are alerted.
Ensure to set Device to ring to either Fixed or
Both.
Include executive assistant Specifies that all executive assistant locations are
alerted.
Ensure to set Device to ring to either Fixed or
Both.
Mobile identities alerted Specifies the list of mobile identities that are alerted.
BroadWorks Anywhere and Mobility icons
Busy Lamp Field
With the Busy Lamp Field (BLF) feature, you can monitor the call status of other phones
connected to the same network.
Important:
BLF lines are not call appearance lines and cannot be used to make calls.
In the Broadsoft environment, you can add a BLF user from the Phone screen.
In the Asterisk environment, the system administrator adds the new BLF user.
Depending on the configuration, you can use BLF lines to the following tasks:
• Monitor the activity status of the phone.
• Receive incoming calls for another user that is Directed Call Pickup.
• Speed Dial of a BLF user in an idle state.
• View outgoing call status.
• Barge-in on an active call.
• Unpark a call in the Broadsoft environment.
The administrator configures the action of the BLF line key. Depending on the configuration, when
you press the BLF line key, the phone does one of the following:
First soft key is the key on the bottom left corner of the phone screen.
• Performs the first soft key action.
• Highlights the corresponding line.
Advanced features
April 2021 Using Avaya J189 SIP IP Phone in Open SIP 74
Comments on this document? infodev@avaya.com
To Next Page
Loading...
