Procedure
1. Access the general settings. From the Avaya XT Series web interface, select Basic
Settings > Preferences > General. From the endpoint's main menu, select Configure >
General.
Figure 16: General Settings
You can use the XT Remote Control Unit's initial default pairing to perform this task.
2. Enter a two-digit numeric code between 01 and 96 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the Simplified XT Remote Control Unit, press the * and # keys simultaneously until its
RED light blinks twice. On the advanced remote control unit, press the RED and GREEN
keys simultaneously until the GREEN light becomes RED.
5. Using the keypad, type the same number used in the Remote control code field.
When the code is not the default 01, the system displays the paired remote icon with its
new code at the top-right corner of the screen.
6. Select Finish in the web interface, or select OK on the endpoint.
Related links
About the XT Remote Control Unit on page 40
Controlling the Avaya XT Series
March 2021 User Guide for Avaya XT Series 45
Comments on this document? infodev@avaya.com
To Next Page
Loading...
