Procedure
1. Access the Recording menu. From the Avaya XT Series web interface, select More
Actions > Recording. From the endpoint's main menu, select Recording, or during a call,
press ok/menu on the XT Remote Control Unit, and select Meeting Options >
Recording.
Figure 44: Recording Menu
The Recording screen indicates the amount of time you can record based on the available
space on your USB storage device.
2. To start recording, select the Record option under your preferred recording location (USB
or the network). For more information about the location options available to you, see the
Before you begin section above or
Setting Recording Preferences on page 106.
The recording icon appears at the top of the monitor, next to the remaining time available
for the recording. You can pause or stop the recording by selecting those buttons in the
recording screen.
Figure 45: Recording icon and time remaining on this USB drive
If you started the recording at any time after the videoconference started, the recording
automatically stops when the videoconference ends. Otherwise, stop the recording by
selecting Stop.
3. To playback recorded videoconferences stored on a local USB storage device, from the
endpoint interface select the recording and press ok/menu to play. From the Avaya XT
Moderating Meetings
March 2021 User Guide for Avaya XT Series 98
Comments on this document? infodev@avaya.com
To Next Page
Loading...
