Avery Dennison AP5.4 Gen II - Com4 Port; Baud Rate; No. of Data Bits; Parity

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
43
> COM4 PORT
Internal interface, to which the optional RFID read/write unit can be
connected.
Baud rate
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
P See parameter Baud rate  on page 45.
No. of data bits
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
Fixed setting of 8Bits.
Parity
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
P See parameter Parity  on page 45.
Stop bits
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
Fixed setting of 2Bits.
Data synch.
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
P See parameter Data synch.  on page 46.
Frame error
AP5.4 AP5.6
¯ With mounted and connected I/O board only.
P See parameter Frame error  on page 46.