03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
16
PRINT INFO
¯ Printing of individual reports can be deactivated for certain options (e. g.
for the infeed option).
A material width of 100 mm is necessary to print the reports. The status print-
out is approx. 200 mm long.
Printer status
AP5.4 AP5.6
A protocol can be printed to get an overview of customer-specific parameter
settings (three pages, see [1]).
¯ Which parameters are listed, depends on the printer type.
[1] Example printout „printer status“ (64-05 with firmware version 2.46).
Listed items: y Systemversion:
– Shows the installed firmware version as well as the release date of this
version.
– Firmware version: R = firmware RISC processor, H = firmware
H8 processor.
To Next Page
Loading...
