Avery Dennison AP5.4 Gen II - Error Indication; Error Checking; Image Save Path; Command ^PR

03/10 Rev. 5.05-00 USER- / SERVICE MANUAL Info-Printouts & Parameters
AP5.4 Gen II – AP5.6
82
Error Indication
AP5.4 AP5.6
Selects the way, in which the printer responds in the event of error occuring
during printing.
Error Checking
AP5.4 AP5.6
Enables or disables error checking, when the printer is handling print fields.
YES Error checking is enabled. (Default)
NO Error checking is disabled.
Image Save Path
AP5.4 AP5.6
Selects the memory to be used by the ^IS and ^IL commands.
¯ Interpreter version: 1.10 or higher.
CF Card Optional CompactFlash card
Internal RAM The printer´s internal RAM. (Default)
Command ^PR
AP5.4 AP5.6
Disable The print rate sent in the MLI printjob is ignored.
Enable The print rate is not ignored.
Command ^MT
AP5.4 AP5.6
Disable The material type sent in the MLI printjob is ignored (thermo-transfer or ther-
mo-direct).
Enable The material type is not ignored.
Error
Level
Setting
LOW HIGH OFF
0 Ignore Ignore Ignore
1 Ignore Flash on the display Ignore
2 Prompt user for action Prompt user for action Ignore
[8] Error handling settings.
Low
High
Off