Chapter 4: Installing Pro Tools | Sync X 9
Chapter 4: Installing Pro Tools | Sync X
Installing and setting up Pro Tools | Sync X involves the following:
1 Unpacking Pro Tools | Sync X from the box.
2 Registering Pro Tools | Sync X.
3 Rack mounting Pro Tools | Sync X (optional).
4 Connecting cables.
5 Launching Pro Tools and enabling Pro Tools | Sync X.
Unpacking Pro Tools | Sync X
Before you get started installing Pro Tools | Sync X, unpack the box, which contains the following:
• Pro Tools | Sync X
• Power cable
• Serial cable
• BNC cable (x2)
• MIDI I/O Breakout cable
• Rack mount and desktop accessory kit
• Registration card with redemption code, QR code, and serial number
• Warranty Claims Information card
• Avid Health and Safety Guide
• Safety and Regulatory Information Sheet
Keep the Registration card on hand to register Pro Tools | Sync X and access documentation downloads. Set the cables aside until
you are ready to start making cable connections. Remove Pro Tools | Sync X from the box and packaging, and place it on a hard,
dry surface.
Registration card: front and back
To Next Page
Loading...
