Avid Technology Pro Tools SYNC X - Back Panel Connectors

Appendix A: Specifications 35
Back Panel Connectors
Connector Specifications
LTC IN
Format: SMPTE/EBU 80-bit longitudinal, drop frame/non-drop frame
Connector: 3-pin XLR female per IEC 268-12
Speed Range: 1/10 to 30X play speed, forward or reverse
Level: –24 dBu to +9 dBu, differential (pin 2 hot)
Impedance: 8K ohms
LTC OUT
Format: SMPTE/EBU 80-bit longitudinal, drop frame/non-drop frame
Connector: 3-pin XLR male per IEC 268-12
Speed Range: Generate mode: Tracks VSO
Regenerate mode: Nominal Frame Rate +/–8%
Level: –24 dBu to +9 dBu RMS, in 3 dB steps, differential (pin 2 hot), when measured
with 600-ohm load
Level Default: 0 dBu RMS, 1.52V p-p ±10mV
Output Impedance: 100 ohms
Load Impedance (mini-
mum):
600 ohms
Rise/Fall Time: 30us ±1us measured between 10% and 90% p-p
VIDEO REF IN
Format: NTSC 525/29.97
PAL 625/50
Slow PAL/23.98
Slow PAL/24
1280 x 720/23.98
1280 x 720/24
1280 x 720/25
1280 x 720/29.97
1280 x 720/30
1280 x 720/50
1280 x 720/59.94
1280 x 720/60
1920 x 1080/23.98/P
1920 x 1080/24/P
1920 x 1080/25/P
1920 x 1080/29.97/P
1920 x 1080/30/P
1920 x 1080/23.98/PsF
1920 x 1080/24/PsF
1920 x 1080/50/I
1920 x 1080/59.94/I
1920 x 1080/60/I
1920 x 1080/50/P
1920 x 1080/59.94/P
1920 x 1080/60/P
Level: 1V p-p
Termination: 75 ohms
VIDEO REF OUT
Level: 1V p-p
Source Impedance: 75 ohms