Avision @V6600 - Information Messages During Networking

Service Manual
5-11
5.2.8 INFORMATION MESSAGES DURING NETWORKING
Message
Action
The connection has failed.
Please check network settings.
Ping the IP address of the product from another
PC in DOS prompt. For example, type “Ping
10.1.20.144” in Dos prompt. If the product has
no response, then perform the following steps.
Check if the RJ-45 connector is firmly plugged-
in.
Check the Ethernet cable.
Check the product’s IP address.
Check the destination IP address.
Check Subnet Mask.
Check Gateway IP.
The address is invalid.
Please check network settings.
Network is down.
Please check network settings.
Network is unreachable.
Please check network settings.
Connection aborted by the
server.
Please check network settings.
Connection reset by the
server.
Please check network setting.
Connection timed out.
Please check network setting.
Unable to reach the
destination host.
Please check network settings.
Failed to connect mail server.
Please check network
environment.
Check network environment.
Connection error.
Please check network
environment.
Failed to create socket for
DHCP
Check IP address of DHCP server or contact your
network administrator for further help.
Failed to search DHCP server.
Failed to get IP from DHCP
server.
Failed to renew IP from DHCP
server.
Table 5.8