Avision @V6600 - Procedure for Disassembly and Reassembly

6-2
6.2 Procedure for disassembly and reassembly
6.2.1 Notes on disassembly
(1) Clean the disassembly and assembly location.
(2) Disconnect the power cable and remove the AC plug from the outlet before
disassembly and assembly.
(3) Follow the disassembly and assembly procedures. Never loosen the screws of
parts that must not be disassembled.
(4) Store the disassembled parts in a clean place to avoid loss.
(5) After replacement, check the contacts and spare part mounting.
(6) Assemble the parts in reverse order of disassembly procedure.