AVM FRITZ!Box 7590 AX - Enabling DECT Eco Mode

Enabling DECT Eco
Overview
With the following settings you can reduce the radiation of DECT emis-
sions:
• Reduce DECT field strength: Enable this setting only if you use all
DECT devices in the vicinity of the FRITZ!Box. Reducing the field
strength reduces the range of the DECT radio network.
• DECT Eco: When DECT Eco is enabled, the FRITZ!Box switches off
the DECT radio network when all cordless telephones are in stand-
by mode. The radio network is switched back on when a call arrives
or you press a key on a cordless telephone.
You can enable these settings individually or at the same time.
Requirements
• All registered cordless telephones support DECT Eco: Under Tele-
phony > DECT > Monitor in the FRITZ!Box user interface, DECT Eco
supported is displayed for each telephone.
• The following devices are not registered with the FRITZ!Box:
FRITZ!DECT devices with a smart plug, FRITZ!DECTRepeaters,
another FRITZ!Box in DECT repeater mode.
Instructions: Reducing DECT Transmission Power
1. Open the user interface; see page56.
2. Click on Telephony > DECT in the menu and then on the Base
Station tab.
3. Enable the Reduce DECT field strength checkbox.
4. Save your settings by clicking on Apply.
Instructions: Enabling DECT Eco
1. Open the user interface; see page56.
FRITZ!Box 7590 AX 134
User Interface: Telephony Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •